How to use cooling / warming mode selector when you plug the appliance into the wall socket
with direct current
1. Set the switch to the DC position.
2. If you set the switch to the cooling mode, the green LED will light up.
3. If you set the switch to the warming mode, the red LED will light up.
4. If you set the switch to the OFF position, the appliance does not work.
Warning:
When you change modes do not use immediate switching from cooling to warming and
vice versa, always leave the switch at least 5 minutes in the OFF position. This could cause da-
mage to the cooling/heating system.
Warning
Do not put electrical appliances into the cooling box.
Do not disconnect the appliance from the power supply with wet or moist hands and
do not wash the fan and electrical parts with water. Do not immerse the appliance
into water.
It is prohibited to dismantle and repair the appliance on your own.
Before unplugging the appliance always turn the switch to the OFF position and wait
until the appliance stops to work.
The appliance is equipped with polarized plug. The plug must always be exactly the
type of wall socket. Do not use the appliance in any other type of the outlet than that
for witch it is intended, do not use reduction. Do not replace the plug on your own.
Warning:
Do not pull the cable to remove the plug from the socket.
2
1
3
4
Содержание C&W 45 l
Страница 1: ...HU PL SK DE EN CZ COOL BOX C W 45 l ...
Страница 2: ......
Страница 51: ......
Страница 52: ......