G21 California, Руководство пользователя, Страница: 6 / 68

Grill instructions
1. Prior to lighting of the burners open the lid.
2. First turn all the switches clockwise to the OFF position.
3. After permeability check connect the regulator to the gas tank. Turn the gas supply to the ON po-
sition.
4. Press the front left button and keep it pressed. Turn the switch counterclockwise to the HIGH
position (you will hear a clicking sound) which should lead to ignition of the burner. If the burner
is not burning, repeat the procedure.
5. If the burner does not ignite even after further attempts, wait 5 minutes and repeat step 4.
6. Set the desired temperature by turning the switch between the „high“ / „low“ positions.
7. If the burners are not ignited even after several attempts, check the connection of the gas tank
and proper connection of the gas supply or contact your sales representative.
8. If you wish to ignite other burners as well, proceed from left to right and repeat step nr. 4). Ne-
ver attempt to ignite other burners until the first burner is on fire – it always has to be ignited first.
9. If you wish to move the grill or store it, turn all switches gas tank valve, regulator and on the grill
to the „OFF“ position.
Similar process can be applied also for cooking or grill on the side burner.
Prior to first use, open the lid, ignite the grill and let all burners burn for 15 minutes with high tem-
perature setting. This will result in scorching of the surface finishing of the grill.
Clean the grill after each use. This will help to keep the grill clean and without burnt pieces of meat,
fat and other foods and will assure the best quality of your food preparation.
DO NOT USE aggressive or flammable cleaning agents as this might lead to damaging of the pro-
duct or fire. Please only use hot water and detergent.
WARNING: Some parts of the grill can be very hot. Keep them in sufficient distance from children
and do not allow kids to use the grill (some parts might be hot even 1 hour after use). We reco-
mmend using heat resistant protective gloves for using and cleaning of the grill to avoid the risk
of injuries.
Cleaning and maintenance
Caution:
Cleaning and maintenance should only be performed when the grill is cold and unplu-
gged from the gas tank.
Outer surface
Use gentle detergent or baking soda and hot water. Detergent can only be used for protective
parts (covers etc.) but not on the grill itself. After detergent use wash the grill with water.
Always check impermeability prior to use!
Never perform the impermeability check close to open fire or if the tested parts are
in use.
Perform the permeability check by submerging the hose into water. If bubbles appear,
the hose is faulty and it needs to be replaced. Perform the same test with the pressure
regulator.
Do not attempt to repair faulty hose or regulator by yourself. Contact your gas supplier
and do not use the grill with faulty parts.