CZ - 3
UsEr MANUAl
MCH 607
1) Installation Instruction
• Place and position ball joint(3) into mounting
ring(2).
• Press firmly until it snaps in position.
• Secure and tighten mounting ring(2) into hol
-
der(1).
2) Installing and removing the holder
• Lift up the lever and place the holder on the
windshield close the suction lever.For taking
of the holder, rise the suction lever and detach
the suction cup from the release tap. When the
suction is still too strong to detach, hold the
upper body and lean it backwards pulling up the
release tap.
• Secure the mounting stand(4) to windshield,
Clean window surface before applying firm
pressure, Adjust accordingly to any angle for
hands-free viewing position.
3) Pull one arm of holder to wider position. Put
mobile into it.
caution:
• Do not install on the airbag deployment zone.
To remove, lift up the lever first and remove
it gently from the release tap. The surface
where the suction is in work could be raised
by suction power. Do not disassemble or
modify the product. Do not use chemicals or
detergent, it may affect the surface.
B
3
2
1
A
B
3
2
1
A
B
3
2
1
A
