G-WEIKE G1, Руководство пользователя, Страница: 32 / 36

31
3. Fire safety
When cutting or engraving materials, the equipment uses a high density laser beam to illuminate
the material, so that the surface of the material produces high temperature, the purpose is to vapor
-
ize the material without burning it. But most materials are inherently flammable and can ignite and
form an open flame, which can burn down the device (even if the fuselage is made of flame-retar
-
dant material) and its surroundings. Research shown that vector cutting with lasers is most likely to
produce flames.
Carefully read the warnings and advice:
Children, minors and people without self-protection awareness are strictly prohibited from han -
dling the product.
When the laser device is working, do not look at the laser with naked eyes. Wear laser goggles.
When the laser is working, ensure that the working environment is well ventilated. Other radia
-
tion, harmful gas, poisonous gas, or odor-smelling gas may be generated due to the different
objects that the laser directly targets.
When the laser is working, place a fire extinguisher nearby. Do not stack inflammable and explo
-
sive materials around the workbench and the device to prevent accidental fire caused by the laser.
When the laser is working, keep a proper distance from the device and wear protective equip
-
ment, such as safety goggles and protective covers.
Do not leave the laser equipment unattended when working.
4. Electrical safety
Carefully read the warnings and advice:
When the device is connected to the power supply, do not remove any parts of the laser to avoid
accidental power shock.
When the device is connected to the power supply, do not touch the electronic area with hands or
other tools.