13
3.4.2 Fastening for profile, front panel, control panel
Using a screwdriver, tighten the screws
until the finger scanner is secure.
Do not tighten too much, otherwise the
housing may be destroyed.
Finally, snap the decorative element
including the gasket for external use into
place.
When the screws are tightened, the
snap-in noses move outwards and snap
the finger scanner into place in the
profile and the front panel.
3.5 Disassembling the decorative element
A notch is located on the underside
of the decorative element. Lift the
decorative element upwards using
a screwdriver, for example, until the
locking catches are released. Lift the
decorative element upwards slightly and
pull it outwards at an angle.
Attention: In the process, be careful not
to damage the surface of the door!
