Manual
www.g-tools.nl
G-kit Bonanza 0,35m2:
Specifications:
Material:
aluminium extrusion profiles
patented plastic g-tools corner connectors
moist and fire resistant PVC/XPS sandwich panels
Dimensions:
external (h x w x d): 176 X 61,5 X 61,5cm
internal (h x w x d) : 161 X 58,5 X 58,5cm
Items below are only delivered when you’ve bought a complete version:
Timer
Legrand Omnirex
minimum switch on period 15 min.
230V, 50Hz, 16A
maximum capacity 3680W
Ventilator
Winflex 125 VKO in line axial ventilator, 185m3 / hour build inside silencer
Lighting
Lucilux 250 Watt, Roadrunner reflector, Sunkraft 250 Watt,
G-bars or G-leds led grow light
Filter
maximum air flow: 240 m3/hour
optimal air flow: 160 m3/hour
height: 250mm
diameter filter: 190mm
diameter flange: 125mm
weight: 1,5kg
Warranty procedure:
G-tools offers a 2 years warranty on all components of the Bonanza except bulbs and filters. Please contact your
G-tools rep to explain the problem as there might be an easy fix without having to replace a part.
Maintenance and safety regulations:
The G-Kit Bonanza is a maintenance free object. Never the less there are a few factors to take into account.
- Only use grounded wall outlets to plug the Bonanza in.
- Do not plug the Bonanza into the wall outlet untill the machine is fully assembled and you have read the
instructions.
- Avoid contact of water with all electrical equipment
- When changing the light bulb always unplug the Bonanza from the wall outlet.
- Make sure the light bulb has had plenty of time to cool of before touching it.
- After screwing in the HPS bulb wipe finger prints of the bulb with a clean dry cloth to ensure its full life.
- Wait 20 minutes after the light has turned of before turning it on again.
- It’s recommended that no more than 1 G-Kit Bonanza goes on a single 15A breaker. We also recommend the
Bonanza is plugged into a surge protector. This will protect the machine from any power spikes due to storms,
power outages, etc.
