3.
Using the Navigation Pad ( ) to scroll and the Left soft key (
) to select
items, choose the desired profile.
Information
If the phone is connected to an AP, you can display IP, AP, SIP, Firmware version
and MAC address information using this submenu.
To display the information page, perform the following steps:
1.
Press the Left soft key ( ) to display the main menu.
2.
Using the Navigation Pad ( ) to scroll and the Left soft key (
) to select
items, go to Information.
The Information page displays.
Note: If you have not configured connection or profile
setup, the only information available in this menu is the
Firmware Version.
WPS Registration
Wi-Fi Protected Setup (WPS) is a standard for easy and secure establishment of a
wireless home network, created by the Wi-Fi Alliance and officially launched on
January 8, 2007.
The goal of the WPS protocol is to simplify the process of connecting any home
device to the wireless network, and so it was first named 'Wi-Fi Simple Config'.
Also, the protocol is meant to prevent home users from exposing their networks to
any sort of attack, and especially free-loading onto their connection to the
internet, by configuring the Wi-Fi Protected Access parameters of the Network in
an easy way.
The standard achieves its goal by putting much emphasis into usability and
security, and the concept is implemented through four usage models that
enable a user to establish a home network. so e.g. to add a new device to the
Network the user can have up to two choices:
1.
PIN Method, in which a PIN (Personal Identification Number) has to be read
from either a sticker on the new STA or a display, if there is one, and entered at
the "representant" of the Network, either the AP or a Registrar of the
Network, cf below the Protocol Architecture.
This is the mandatory baseline model, every Wi-Fi Protected Setup certified
product must support it.
2.
PBC Method, in which the user simply has to push a button, either an actual or
virtual one, on both the AP (or a Registrar of the Network) and the new
wireless client device (STA).
Support of this model is mandatory for APs and optional for STAs.
Содержание MIP-300
Страница 1: ...1 MIP 300 WiFi Phone User s Manual v1 00 ...
