E006
Page 16
Note:
1.
Calendar format is set as “dd
-mm-
yy” default.
Here, Blinking Segments indicates current selection.
The calendar format followed throughout in the manual
is “dd
-mm-
yy”
.
2. Date validation is done as per month and year entered in Set RTC and date setting menu. E.g.
•
If user has entered the value 31 in date, 06 in month and 21 in year, it will be autocorrected as
30-06-21 (dd-mm-yy).
•
If user has entered the value 29 in date, 02 in month and 21 in year, it will be autocorrected as
28-02-21 (dd-mm-yy).
6.2 View Min/Max and Current Data
As described in key functions (
), by pressing
“
Function
”
and
“
Up
”
key
at the same time
for 1 sec in normal running condition, the display will show Min/Max temperature data for today
respectively. After that display will show current temperature data as shown in figure 8.
Figure 8 View Min/Max and current Temperature
6.3 View Current temperature
The user can view the current temperature by pressing any
key
of keyboard as shown in figure
9.
Figure 9 View Current Temperature
Note:
Current date and time is displayed alternatively at every 3 seconds.
