E006
Page 13
2)
Alarm indication marker for history of last 30 days;
a.
“
-
01” means the alarm was
there on yesterday
b.
“
-
02” means the alarm was there on day before yesterday.
c.
To understand better, let us assume today is 31-01-
2021. Then “
-
01” will be 30
-
01-
2021; “
-
02” will be 29
-01-
2021; “
-
10” will be 21
-01-
2021 and similarly “
-
30” will
be 01-01-2021.
3)
Bell symbol for alarm indication
4)
Battery capacity: Sufficient
; Partly empty
; Low
; Empty
5)
Min: Minimum stored reading for the given day
Max: Maximum stored reading for the given day
6)
Upper
▲
/ Lower
▼
limit if reading exceeded alarm limits.
7)
Current temperature reading
8)
Temperature Measurement unit (°C / °F)
9)
Recording state indicators
–
REC - Recording; PAUSE
–
Recording Paused. When recording
is paused, actually the data is recorded at the store interval but these data is not
considered to calculate Min/ Max / Alarm duration.
PAUSE will be auto resumed to REC
after 15 minutes.
10)
Digits used to display various parameters like Day, Date, time and duration.
11)
Delayed start indicator: when first time logger is started by setting calendar, it will wait
for 10 minutes to start logging the data. During these 10 minutes time only, this sand
clock symbol will be on. This symbol will also come on during PAUSE mode.
12)
DUR: Total alarm time duration symbol
13)
Clock symbol: This symbol comes along with time displayed in digits
14)
Calendar symbol: This symbol comes along with date displayed in digits
15)
-DAY: Previous day(s) number indicator symbol for History data
16)
USB connection symbol
Note:
For Technical reasons, the display intensity of liquid crystal display becomes lower at temperatures
below 0°C. This has no influence on the measuring accuracy. For technical Reasons, the battery
performance decreases at lower temperatures. We Recommend the use of fully charged batteries to avoid
a reset of the instrument at low temperatures.
5.3 Key functions
Function (Set) key:
It is used to enter main menu or come out from the main
menu/submenu.
UP Key:
It is used to increment the parameter value or go to the next
submenu and for activating device when device goes to sleep mode.
Enter key:
It is used to store the parameter value and to enter in menu
for modification.
