Page 16
4)
Reading is outside both the
Single and cumulative
alarm setpoint high/ low for time
duration less than alarm high/low delay.
-
OK sign, battery, reading with UP/ Down arrow and unit will be seen on display.
5)
Reading is outside both the
Single and cumulative
alarm setpoint high/ low for time
duration greater than alarm high/low delay.
-
Alarm sign, bell sign, battery, reading with Up/ Down arrow, single event indication
and unit will be seen on display.
5.7 Measurement of the data
5.7.1 Start Recording data
➢
The Data recording can be started by one the criteria explained in section 5.3.
➢
The device will store the data as per configurated store interval, which can be
downloaded later on for analysis.
5.7.2 Tag Events
➢
When alarm high/low trigger condition arises, alarm triggered tag event is logged as per
alarm Tag Id.
➢
Alarm restored tag event is logged as per alarm number when Temperature reading
comes within the alarm high/low limits.
➢
User entered Tag is logged as Manual Tag Event
“TAG”
with a time stamp.
