G-Tek 62 Series, Руководство по эксплуатации

Страница: 78 / 83

77
10 TROUBLESHOOTING GUIDE
1. Problem: At power on, display screen appears blank
Solution:
a. Check if a working supply cable is connected correctly
b. Check Mains supply
c. Check if internal LEDs are ON or OFF.
Try turning the device OFF and then turn it ON again.
2. Problem: Blue Screen appears on the display
Solution: If an error message reads: ‘OS/ SD Card Corrupt’,
contact a factory personnel.
3. Problem: Channel data is not updated as per input type and range:
Solution:
a. Check channel configuration parameters
b. Check sensor connection wiring
c. If the problem still persists, re-calibrate the channel.
d. Try factory reset on the device. (This would not erase the channel data. It will
only modify the parameters.)
4. Problem: Check device communication:
Solution:
a. Access webpage u sing IP address. If it doesn’t load,
i. Check LED on TCP/IP connector.
ii. If the LEDs are off, check the cable.
b. If the problem still persists, contact a factory personnel
5. Problem: What type of pen drives are supported by the device?
Solution:
a. Storage space of up to 16 GB