6
6. MODE button
Stop video recording. Short press in standby mode allows switching the
operation modes: Video / Photo / Playback.
7. SWITCH button
Short press – switching between front and rear cameras.
8. RESET button
If your video recorder fails to react to the pressing of buttons, press RESET but-
ton for forced resetting of the device.
9. Slot for memory card
Slot is meant for installing MicroSD memory card into the video recorder.
Before installing the memory card switch the device off.
ATTENTION:
Make sure that the memory card‘s position is right. Your attempt
to insert the memory card facing the wrong direction may bring about
damage to the device and also to the memory card.
Warning:
Do not apply too much force when installing the memory card to
avoid damage to the device.
In order to install the memory card insert the micro SD card into the slot
pushing it down all the way (till it clicks). In order to remove the memory card,
press it until it clicks and pull it out of the slot.
