A3 Charger Instruction
A3 Charger is a smart charger which specifically designed for2S/3S LIPO battery of
Model car. It’s small size and easy to operate.
Operation Instruction:
1. Power on the charger, AC input AC100-120V, 50/60Hz, charger enter to the
stand-by mode and Constantly Green LED.
2. Connect to battery and then charger enters to charge mode, LED turn to
constantly red.
3. When finishing charging, reminds with constantly Green LED, then you can pull
out the battery.
4. Battery and charger will emit heat, it’s normal situation.
Caution:
1. Please read the manual completely and carefully before operate.
2. It’s forbidden to charge any other batteries but LiPo battery. It may cause battery
explosion or other dangerous situation by connecting to the wrong batteries.
3. Please charge under supervising. Never charging in rainy, humid and dangerous
place in case any accident.
4. When observing battery or charger is abnormal during charging LiPo battery,
please disconnect the power and battery immediately in case any accident.
Specification:
1. Input: AC100-120V, 50/60Hz,0.3A
2. Output: DC8.4V or 12.6V/0.9A
3. Surrport battery type: LiPo 2S/3S
4. LED indicates charging status:
Standby-Constantly Green,
Charging-Constantly Red,
Finish-Constantly Green
5. Output Port: XH2.54-3P for 2S LIPO,
XH2.54-4P for 3S LIPO
