4
How to program the GSM Gate Opener
TEXT MESSAGE ENTRY
You must first enter the telephone numbers that are authorized to use the gate opener. If
you do not require authorized numbers turn dip switch 1 to off position. (Ref FIG 1) This will
allow all incoming calls to operate the unit. After inserting your simcard into the Gate
Opener, turn on the unit and wait until you receive a steady blue light, this will indicate that
you have a mobile signal.
You will now need to send a text with the contact numbers.
Example: (
Hash
) (01 to 80) (
Star
) (phone number) (
star
)
Note:
To avoid confusion we have colour coded the hash (
#
) and the star (
*
) symbols.
#
01
*
01798123456
*
Then send this as a text to the simcard
#
*
“
“
*
You can only send one text at a time
#
80
*
01798898765
*
Max 80 numbers
PLEASE NOTE YOU CAN ONLY SEND ONE NUMBER AT A TIME
PLEASE SEND THE MESSAGE AND WAIT FOR THE GATE OPENER TO
SEND YOU BACK A TEXT ACKNOWLEDGEMENT “STORED”
BEFORE YOU TRY TO ADD ANOTHER NUMBER VIA TEXT ENTRY
If you wish to cancel a number follow this example.
(
Hash
) (01 to 80) (
Star
) (
Star
)
#
1
**
Then send this as a text to the simcard
Below is a notepad to help you remember the numbers that you have saved
to your simcard, in the event you need to modify or delete In the future.
#
01
*
________________________
*
#
06
*
________________________
*
#
02
*
________________________
*
#
07
*
________________________
*
#
03
*
________________________
*
#
08
*
________________________
*
#
04
*
________________________
*
#
09
*
________________________
*
#
05
*
________________________
*
#
10
*
________________________
*
If you do not need authorized numbers you can turn
Dip switch 1
to off
CALL ID
as in
fig.1
.
Please make sure you have credit on your simcard to receive the text the acknowledgment.
It may take some time to receive a text acknowledgement this depends upon how busy
your telephone network is.
