Page 10
Mains Failure Alarm
By connecting to the mains power using a 9/24v power supply the auto dialler can act as a
mains failure alarm. It will monitor the power connected to the power input and send a text
message alert if the power is disconnected.
When the power is disconnected for a period of 4 minutes, you will receive the text message
alert
POWER LOSS.
When the power is restored you will receive the text message alert
POWER RESTORED.
Battery Backup
When power has been disconnected the unit will revert to the onboard battery backup. The
battery back will operate the auto dialler for up to 24 hours before it will need to be recharged
by connecting 12 volts back to the power input.
NOTE
- The battery will only work when the battery is switched on. If you do not switch the
battery switch on then the battery backup will not work. Please refer to PCB reference on
page 4
Microphone and Speaker (optional extra purchased seperately)
The unit has an onboard microphone. To activate it, make a phone call to the units number.
After a few rings the call will be answered and you will be able to hear what is happening in
the surroundings of the unit. To cancel this operation simply hang up.
For two way audio, that will enable you to communicate with someone in the vicinity of the unit
please purchase our speaker from the accessories page on the website. This can be plugged
into the side socket of the unit to enable two way conversation.
