Installing your simcard
New SIM cards will need registering before they can be used. Full details of how this is done
can normally be found in the SIM card pack. It will normally require that the SIM card is
inserted into a mobile phone, a number dialled and instructions followed. While the SIM is in
the mobile phone it would be a good time to disable call diverts, ring back and disable features
such as
voicemail
and
text
alerts. Please be advised that if the intercom will be used on a
regular basis, we would recommend a contract based sim card as pay as you go call charges
can be as high as 25p per call. Please activate and put credit on your simcard then disable the
voicemail using the following codes
Vodaphone:
call 1210
Tesco
call 2915
T-Mobile:
call 222
O2
call 1760
Orange:
call 4502
Giff Gaff
call 1626
EE - send the text message command VM OFF to 150
Ensure the unit is powered down before inserting the simcard
1: Slide back the sim door and lift it up.
2: Slide the simcard in to the door making sure that the clipped corner of the simcard
lines up with the clipped corner of the sim holder.
3: Close the SIM door.
4: Slide the SIM door to lock the simcard in place.
5: Connect 12 volts DC to the input connector as per figure 1.
*Important DC Only - Please use the power supply supplied with the unit
Once power has been applied (referring to figure 1) the
blue
network LED light will flash
once every second. Once a signal has been found the
green
LED will come on and stay on.
To check the strength being received please send the text message
#
SIGNAL
#
The unit will reply back with a score from 1 - 30. The unit must have a score of at least 10.
We strongly recommend checking the signal strength on both 2G and 4G and using which has the
highest signal strength score. The signal strength should be at least a score of 10 for reliability.
For use with the mobile network “three” you can only use the 4G Settings
2G OR 4G
The intercom can work on both 2G and 4G Networks, you can choose which network the unit
will use via Dipswitch setting 1.
Dipswitch OFF The unit will search for a 2G Network signal.
Dipswitch ON
The unit will search for a 4G Network Signal
Page 4
www.gsm-activate.co.uk
- 01273462380 - [email protected]
