INSTRUCTIONS
IMPORTANT- PLEASE READ
PLEASE MAKE SURE YOU DISCONNECT THE POWER WHEN YOU FIT THE SIMCARD
AND YOU PLACE THE SIMCARD WITH THE CLIPPED CORNER AS SHOWN IN THE
PICTURE ABOVE.
Powering GSM Switch
Connect 240 volts to the input connector as per figure 1. Once power has been applied the
blue
network LED light will flash once every second. Once a signal has been found the
green
LED will come on and stay on indicating the unit is now ready for use.
Signal Strength
To check the strength of the signal received please send a text message
#
signal
to the
simcard number placed in the switch unit. The unit will reply back with a score from 1 - 30.
The unit must have a score of at least 10 to work effectively.
2G OR 3G
The 2G/3G Multi Switch can work on both the 2G and 3G networks. You can choose which
network the unit will use at the start up via Dipswitch setting 1
Dipswitch 1 OFF - The unit will search for a 2G Network signal
Dipswitch 1 ON
- The unit will search for a 3G Network signal
NOTE - this is not applicable to the 2G version
We strongly recommend checking the signal strength on both 2G and 3G and using
which has the highest signal strength score. The signal strength should be at least a
score of 10 for reliability.
Page 3
Slide the simcard into the holder making sure that the clipped corner of the simcard
lines up with the clipped corner of the simcard holder
