How to program the Multi Function Switch
Once the unit has a
green
light it is ready to be used. The unit can be set by switching
dipswitch 2 to ON so only authorised numbers you store can activate the unit. If dipswitch
2 is left OFF anyone phoning the units number can operate the relays.
If you do not require authorised users please skip to the next page
HOW TO USE THE MULTI FUNCTION SWITCH
To program a number to the caller ID (whl) list you will need to send a text message code:
#
WHL
#
NUMBER
#
To delete the number send a text message code:
#
DEL
#
NUMBER
#
Example
#
WHL
#
07123456789
#
To store you mobile number. (Maximum 60 users)
Example
#
DEL
#
07123456789
#
To delete mobile number.
If the code is accepted the unit will reply “WHL number stored” or “WHL number deleted”
Once the numbers have been programmed please set dispwitch 2 to the ON position
PLEASE NOTE
YOU CAN ONLY SEND ONE NUMBER AT A TIME. PLEASE SEND THE MESSAGE AND
WAIT FOR THE MULTI SWITCH TO SEND YOU BACK A TEXT ACKNOWLEDGEMENT
“STORED” BEFORE YOU TRY TO ADD ANOTHER NUMBER VIA TEXT ENTRY
Please make sure you have credit on your simcard to receive the text acknowledgment.
It may take some time to receive text acknowledgements depending upon how busy
your telephone network is at the time.
Reset Function
For a quick reset and to clear all numbers there is a built in reset function that is triggered
via sending an sms/text message.
Send a text message (
#
reset
#
) to the unit
The unit will then remove all WHL numbers stored.
Please only use this function is completely necessary.
Page 4
