G-RF G99S, Руководство пользователя, Страница: 5 / 6

6.1.5 If the same radio transmitter was registered at di ff erent
numbers then only the last registration is remembered, and
previous is automatically removed.
6.2 MODIFICATION AND REMOVING OF REGISTERED
NUMBERS
6.2.1 For recording a new radio-transmitter it is necessary to switch
the device in the "PROGRAMMING" mode as it described in it 5.3.
To adjust necessary number of recording and to carry out recording
as it described in it 5.4.3 and removing of before registered number
is not necessary.
6.2.2 Removing of any registered number is carried out according
to it 5.4.4.
6.3 OPERATION IN "RECEPTION" MODE
6.3.1 Turn on the device.
6.3.2 On the display the symbol
- - is displayed.
6.3.3 The device is in "Reception" mode.
6.3.4 At presence of any enabled (registered) call, the registered
number (for example, 01) is displayed and the beep is generated.
At call reset by pushing of
RESET button or remote RESET (see it
6.1.4), the beep is muted and the symbol - - is displayed.
6.3.5
At reception if more than one enabled (registered) call, the
registered number of the
fi rst received call with points after digits
(,)is displayed (for example (0,10), and the beep is changed. At call
reset, by
RESET or remote RESET button, the previous registered
number is removed, and the subsequent is displayed and the beep
does not change. The symbol , , disappears if indicated number is
the last received.
6.3.6 It is possible to change sound volume cyclically by consecutive
pushing of the button
<-> .
7. WARRANTY
Warranty period of operation is 18 months. During the warranty
period thi failure arisen on fault of the
fi rm - manufacturer are
removed without disbursement by presentation of the present
certi
fi cate with a marker pip about date of sale and the stamp of
shop.
Getting and using local radio-pager, you provide yourselves with
the uninterrupted, reliable, wireless system for local calls!
5