8
LI0171 – 18 February 2015
Connecting the Cable to the Preamplifier
Important.
Before connecting cable and preamplifier, you must ensure that the upper housing
can turn independently of microphone, preamplifier and cable. This is done by loosening the
microphone from the preamplifier by approximately half a turn.
Doing this ensures that the microphone-preamplifier and the preamplifier-cable connections are
not subjected to strain when the upper housing is screwed onto the lower housing. Also it makes
attachment of the cable to the preamplifier safe.
1. Unscrew the top cone.
2. Set it aside. Make sure it is protected from dirt and moisture.
3. Loosen the microphone housing by half a turn. Hold at the preamplifier connector and the
lower part of the microphone body while turning.
Important.
Make sure to loosen the microphone housing and not only the protective grid!
4. Connect the cable to the preamplifier.
1
2
3
4
3
4
3
4
Fig. 4.
Loosening the microphone-preamplfier: This must be done to avoid strain to the microphone-preamplifer assembly
when connecting the cable and mounting the upper part.
