background image

G.R.A.S.  Sound & Vibration

Power Module Type 12AR - Page  8

6. 

Specifications

Inputs/Outputs:

Input: 

 

Two 7-pin LEMO 1B female connectors for microphone preamplifiers

Output:   

Two BNC coaxial sockets for the output signals of microphone 

   

 

preamplifiers

Output impedance:

30 Ω

Frequency response:

± 0.2 dB:   

0.05 Hz - 200 kHz

Preamplifier supply voltages:

Preamplifier: 

±15 V

Polarization: 

200 V (can be switched to 0 V when using prepolarized microphones)

Power supplies:

4 x LR6 (AA) standard alkaline cells or 
Mains/line adapter supply regulated to 4.5 - 24 V DC

Power consumption:

45 mA with G.R.A.S. preamplifiers

Battery life:

Approximately 30 hours using alkaline batteries
(Valid at 23 ºC)

Fuse:

160 mA (Slow), 250 V

(Low-impedance fuse)

Operating temperature range:

–10 °C to +50 °C

Dimensions:

Height:   

60 mm

Width:   

105 mm

Depth:   

130 mm

Weight:

540 g without batteries.

Accessories included:

EL0001:   

4 x LR6 (AA) batteries

WEEE directive:
2002/96/EC

CE marking directive: 

93/68/EEC

Manufactured to conform with:

RoHS directive:
2002/95/EC

G.R.A.S. Sound & Vibration continually strives to improve the quality of our products for our customers; therefore, the 

specifications and accessories are subject to change.

Содержание 12AR









Отзывы: