G-project G-900M, Руководство пользователя, Страница: 11 / 21

DSS (DUAL SPEAKER STEREO)
With DSS, you can connect two G-MEGAs together to stream in stereo to both at the
same time to enjoy music with double the power and expanded stereo separation.
1 Power on two G-MEGA speakers and switch both to Bluetooth mode.
2
Follow directions to pair and connect a Bluetooth device to one G-MEGA (master)
3 Press DSS button on the master G-MEGA which is already connected to a Bluetooth device
to enter DSS mode, the DSS LED indicator and LED lighting logo will flash amber.
4 Press DSS button on the other G-MEGA speaker to enter DSS mode, the DSS LED indicator
and LED lighting logo will flash amber. When the two speakers are connected, the amber
DSS LED indicator and LED lighting logo will change from flashing to solid.
5
To disconnect the DSS, press the Bluetooth PAIR Button on one G-MEGA.
6 Repeat the above steps to re-connect the two G-MEGA.
NOTES:
- DSS mode requires two G-MEGA speakers.
- You need to connect a Bluetooth device to the master speaker before you enter DSS mode.
- After connected the two speakers, the volume level in these two speakers will be synchronized.
and the EQ can be individually set for each speaker.
- If you cannot connect two speakers successfully, press and hold the DSS button for 3 seconds on
both G-MEGA to reset memory and then repeat the above steps to connect two speakers again.
- Only Bluetooth can work with DSS. LINE-IN and LINE-IN MIX MODE do not work with DSS.