VOLUME CONTROL
Press the or VOLUME
–
buttons to increase or decrease the volume.
PLAYING THE RADIO
1. Press and hold the POWER ON/STAND BY button to turn on the unit, the LCD
backlight turns on.
2. Press AM or FM button to select AM or FM band, the radio mode indicator displays.
3.
For manual tuning,
repeatedly press the TUNE UP or TUNE DOWN button to
manually adjust the tuning on the LCD display until the desired station appears.
4.
For auto tuning,
press and hold the TUNE UP or TUNE DOWN button until the
display starts to scan, then release the button. The tuner will search and stop on the
next strongest station signal it finds. Repeat this process until the desired station
appears on the LCD display.
Notes:
The AM antenna is located inside the cabinet of the unit. If AM reception is weak,
change the position of the unit until the internal antenna picks up the strongest signal.
To increase FM reception sensitivity, fully extend the Telescopic Antenna and rotate to
obtain the best reception of possible station.
SETTING RADIO PRESETS
Manual presetting radio station:
1. To preset a radio station to memory, first follow the previous steps to select AM or
FM radio mode and tune in the desired station.
2. Press and hold the PRESET button
to create a preset for the current station. “P”
will appear and “##” (the preset number) will blink on the
LCD display.
3. Press the TUNE UP or TUNE DOWN button to select a preset number (01- 20).
Press the PRESET button again to confirm the setting and the station will be saved
into memory.
4. Repeat these steps for up to 20 presets, as desired.
5. There has two ways to recall a preset station. First select AM or FM radio mode,
then press the PRESET button and the
“
P##
”
will show on the LCD display. Then
press TUNE UP or TUNE DOWN button to select the desired preset number. Or,
