25
13000W Gasoline Generator
Operation (cont’d)
Powering 120/240 Volt AC Tools And Equipment:
1. Prior to powering tools and equipment, make sure the generator
’
s rated voltage, and amperage
capacity is adequate to supply all electrical loads that the unit will power.total demanding power
the generator's capacity,it is necessary to remove one or more of the tools and/or equipment to
another generator.
CAUTION: ATTEMPTING TO POWER SENSITIVE ELECTRONIC EQUIPMENT,such as
laptops
WITHOUT THE USE OF AN APPROVED LINE CONDITIONER MAY CAUSE
DAMAGE TO THE EQUIPMENT.GREEN-POWER LLC IS NOT RESPONSIBLE
FOR ANY DIRECT OR INDIRECT DAMAGE CAUSED BY FAILURE TO USE AN
APPROVED LINE CONDITIONER.
2. Once the generator is running, simply connect the power cords of 120/240volt AC powered tools
and equipment into the 120/240volt AC dual outlets.
NOTE: THE GENERATOR FEATURES AN AC NON-FUSE THERMAL PROTECTOR
TO PROTECT THE AC CIRCUIT IN CASE OF AN OVERLOAD. SHOULD
AN OVERLOAD OCCUR, THE BREAKER WILL POP.
3. Disconnect all electrical powered tools and equipment from the generator’s 120/240volt AC duel
outlets.
4. After the engine and generator have completely cooled, store generator in a safe, clean, dry
location (if not already installed).
