gm-elektronik.swiss | [email protected]
GM-1525-AM
Page 7 | 23
Operating instruction 1706.003
Manual set:
If you set
No update
, the wizard now prompts you to set the time and date
manually. The date and time are displayed as dd-mm-yyyy and hh:mm AM /
PM
with the first value, dd, active flashing.
Adjust each value with the
Select
control. As each value is set, the next value
becomes active and flashes.
3.1.3. Network
If you don’t want to use the network, you can skip this part with pressing the
Mode
button.
The unit is compatible with all common network protocols and encryption me-
thods, including Wi-Fi Protected Setup (WPS).
To connect the unit to your network, you need one of the following:
• A wired router and an Ethernet (RJ45 network) cable
• A Wi-Fi wireless router, together with password key if set
Select
WLAN region / country > Wi-Fi network (SSID)
, and then select a
network from the list.
To connect to a wired network, select
[Wired]
, after ensuring that the Ethernet
cable from the wired router is connected to the Ethernet socket of the unit.
If the network is open (non-encrypted), the unit connects without any further
ado; see completion below.
Standard encrypted network:
To enter the network’s key (password), use the
Select
control to move the
cursor through the characters and select. As each character is selected, the
key is built up near the top of the display.
There are three options accessible by turning
Select
back before the first cha-
racters (0123 …) –
Backspace, OK
and
Cancel.
WPS encrypted network:
WPS encrypted networks are identified by
[WPS]
at the start of the network
name, and have three methods of connection. Select one and follow the
prompts:
• Push Button
The unit prompts you to press the connect button on the router. It the scans
for a ready push button connect network and connects.
