Page 37
Set method: refer to chapter 4.3.1. Motion detect
Note
:"Advanced" button is the same as rightclick.
4.3.5 Alarm output
Refer to chapter 3.5.4.
4.3.6 Abnormal
Analysing and inspecting current software and hardware of the device: When some abnormal events
happen,the device will make a relative answer such as show message and buzzer.
Picture 4.12 Abnormal
【
Event Type
】
selecting abnormity you want to inspect
【
Enable
】
Select it to make sure abnormal function workable
【
Show message
】
Automatically alarm cue dialog box come out of the main screen
【
Buzzer
】
Device will have two long nosie “di di” while alarm is happening
4.4 System setup
Set the system parameters such as
General,Encode,NetWork,NetService,GUI display,PTZ
config, RS232 and Tour setup
.
