3
Dear Customer!
Thank you for choosing our product.
MIDI WOWEE WAH MWW-1 is a classic analog wah-wah effect enabling to
set the tones and featuring new and comfortable switching mode. MIDI
interface enables fast switching of the tones by using any MIDI controller
(e.g. G LAB GSC).
Basic characteristic:
– Full analogue circuit with an increased voltage, which ensures
functionality without distortion and a lower noise level.
– Photo element instead of potentiometer, which ensures smaller
resistance to motion (thanks to that, the smaller effort allows you to
operate the pedal faster) and greater reliability.
– BASS switch (LOW – bass attenuation like in typical wah-wah,
HIGH – without bass attenuation).
– DEEP switch to control the depth of the resonance circuit functionality.
– Q FACTOR switch (quality factor of the resonance circuit) decreases
boosting of resonance frequency.
– VOLUME switch to control the output signal level.
– Two ON/OFF switching modes: classic with the use of the switch
located in front of the pedal (SWITCH mode), or our new mode,
simple by placing the foot on the wah-wah pedal (TOUCH).
– Clickless TRUE BYPASS circuit that is based on photo resistors.
– Two backlighted indicators (on the left and right side of the wah-wah)
visualising active mode of the wah-wah effect (yellow colour) to make
it easy for you to find the wah-wah on a dark stage.
– MIDI IN connector to control the wah-wah by Program Change and
Control Change commands.
– MIDI THRU connector with copy of the signal form MIDI IN connector.
– Regulation of the resistance to motion force.
– Powder coated case and stainless steel elements.
– 9V supply from regulated adapter (9V DC, current consumption 30 mA).
