5
Control settings
The REVERB 1 or 2 switch enables to select sound characteristics of the used reverb.
TIME controls enable adjusting the reverb time from hundreds of milliseconds up to few
seconds (REVERB 2 offers longer lasting sounding). LEVEL controls enable adjusting the
proportion of the resounded from zero signal to the level of 25% of the incoming one.
Thanks ability of setting two pairs of reverbs time and level parameters, and also thanks
footswitching between these two pairs (REVERB A and B) it is possible switching the used
reverb while playing, what reasonably increases a guitar tone performances.
Typical controls settings:
- quick support playing: REVERB = 2, TIME = 1 to 2, LEVEL = 3 to 5,
- slow support playing: REVERB = 2, TIME = 2 to 4, LEVEL = 4,
- solo: REVERB = 2, TIME = 3 to 5, LEVEL = 4 to 6.
Power supply
The DR should be supplied from external regulated 9V DC power supply, with 80 mA
output or more. Before connecting please check if the connector’s polarisation is proper.
REMARK: Damage of the DR caused by supplying it with power of improper
voltage effects in loss of the warranty.
