3
Connecting the 6LE module to the controller
The 12V power supply and the controlling signal comes from the EXT OUT
connector of the GSC-5 controller. The EXT IN/OUT connector of the 6LE
module should be connected with EXT OUT output of the GSC-5 foot
controller or of the MPM-1 power supply module or with EXT IN/OUT
connector of already connected the 6LE module. For connecting use one of
the cables supplied with the module.
The DIP switches enable to choose a section (A, B or C) for a given 6LE
module in the guitar system.
In case of building the stereophonic system the 6LE modules should be set in
pairs in the same section (A, B or C). In this way the same loops will be
switched simultaneously on the left and right channel.
