G.i.N HostCAMF44, Руководство пользователя

Страница: 8 / 33

- 8 -
© G.i.N. GmbH, 2018
Intelligente Datenlogger
Network Camera (HostCAMF44) Manual
2 General
The Network Camera (HostCAMF44) is a digital camera
exclusively
controlled by the GL53xx via an
Ethernet interface.
Digital images or image sequences can be recorded with up to 4 sensor units. They are saved directly on the
external storage medium of the data logger, not on the data logger ring buffer.
It is possible to record images from up to 8 sensor units in specific use cases tested and verified by G.i.N.
(e.g. via 2 HostCAMF44).
The cameras can be connected via an Ethernet switch (e.g. GLX310) to the GL53xx. The IP addresses of
the 4 cameras are entered in the data logger system with LTL (see chap. 6).
» To operate the Network Camera (HostCAMF44) together with the data logger, a data logger based or
camera-based license is required (see chap. 4).
» The simultaneous operation of more than 4 sensor units is NOT recommended by G.i.N.
» When connecting more than one camera, the IP addresses must not be consecutive.
The camera can be supplied using Power over Ethernet (PoE) or directly via the “PWR” connector. A PoE
injector is optionally available.
Figure 1
1: Control unit
2: Sensor unit