Gg01 User Guide Ver. 1.0
G.G. TELECOM(2002) INC.
4F, #9, Alley 2, Lane 35, Ji-Hu Rd., NeiHu, Taipei City 114, Taiwan R.O.C.
Tel: + 886- 2-8751 0222 Fax: 886-2-8751 0668
10
To proceed pairing the headset with the mobile phone, please follow this guide:
1) Check the mobile phone user guide, then, find out the locations of
Bluetooth and “Bluetooth device discovery”.
2) Power ON the Gg01 Bluetooth headset.
3) Getting into Headset Pairing mode by press “Talk”, “Vol. Up” and “Vol.
Down” buttons at the same time to reset the headset, you can see the
purple indicator blanking 2 times then blue indicator and red indicator
will cross blink per second, now the Gg01 is waiting for pairing now.
4) Perform a “Bluetooth device discovery” from the mobile phone.
Note: It may take several seconds to establish connections.
5) The phone’s display will advise that it has found Gg01 and ask you to
confirm that you want to pair with it. Please confirm this.
6) Enter the passkey “1234” when your phone menu prompts you, and the
phone will start to pair the headset.
7) Your phone screen will advise that pairing has been successful, and the
blue indicator on your headset will rapidly blinking 3 times every 4
seconds when Bluetooth pairing has been established.
If the pairing fails, the blue indicator and red indicator keep cross blinking and
keep about 120 seconds then stop. A re-pairing procedure is needed. Please
refer to step 1) ~ 7) above.
Note: Your phone screen will also give the status. Once the headset and phone have
successfully paired – you are ready to place and receive calls.
