USE AND INSTALLATION MANUAL
edition: 1/05.10.2020
Page
9
of
10
x
in full body harness use only attachment points
(buckles, loops) marked with capital letter “A” to
attach a fall protection system.
15. WARRANTY
The manufacturer grants a warranty for 12 months
from the date of purchase of the device. If a defect is found in
any part, the warranty and guarantee period for this part is
extended by the time of repairs and effective removal of the
defect found.
The warranty covers:
x
Defects in material,
x
Defects in workmanship,
x
Anti-corrosion coating defects
According to the requirements of EN 365 an anchor
point shall be subject to periodic inspections carried out at
least every 12 months. Periodic inspection shall be carried
out by service point authorized by the manufacturer
or person trained in inspections of such equipment.
A trained person is a person who, based on own
specialized education and adequate experience, has
sufficient knowledge in installed protective and rescue
equipment, and is familiarized with applicable OHS
regulations, guidelines and generally acknowledged technical
rules to such extent that is able to assess safety of use
and correct application of protection devices.
Before each use of the system check whether date of
the next inspection is not expired. Do not use the device after
this date. Before each use of the system visually check
the system for its integrity and technical condition and
whether steel cable is tensioned.
If any defect or lack of integrity is found, do not use the
point.
If any doubts arise as regards the use of the
equipment, please contact the manufacturer and never repair
the equipment on your own!
A system which has been used to arrest a fall must be
withdrawn from use immediately!
The system which has been used to arrest a fall can be
admitted for use again after a detailed inspection is carried out
by the manufacturer or an authorized service point.
When using the system, pay special attention to risks
affecting operation of the personal fall protection equipment or
the user’s safety, and in particular to kinks and rope movement
on sharp edges, oscillatory falls, electricity, influence of
extreme temperatures, equipment damage, adverse
environmental factors, chemical substances and
contamination.
Neither modify, repair components of the system nor
replace them with non-original spare parts.
