TABLE OF CONTENTS
INTRODUCTION
01
Congratulations on your choice of the G-force G6 balance charger/
discharger.
The unit is simple to use, but the operation of a sophisticated automatic
charger such as G-force G6 balance charger/discharger does require
some knowledge on the part of the user. These operating instructions
are designed to ensure that you quickly become familiar with its
functions. It is therefore important that you read right through the
Operating Instructions, Warning and Safety Notes before you attempt
to use your new automatic charger for the first time. We hope you have
many years of pleasure and success with your new battery charger.
G-force G6 balance charger/discharger is a high-performance, micro
processor control charge/discharge station with battery management
suitable for use with all current battery types. With integral equalizer for
six-cell, Lithium-Polymer (LiPo), Lithium-Ferrum (LiFe) and Lithium-Ion
(LiIon) batteries.
Maximum 10A charge current; maximum 80W charge power; can be
powered by a 12 Volt car battery or from 100V-240V via the built in
switch-mode power supply.
When a Nickel battery is fully charged, the unit terminates the process
using the Delta-Peak method. Lithium and lead (Pb) batteries are
charged using the CC-CV method.
The fan cooling system is so smart and efficient. The fan speed is
controlled by internal temperature sensor.
The user can check battery's total voltage, the highest voltage, the
lowest voltage and each cell's voltage.
It can be dangerous to mis-handle batteries and battery chargers, as
there is always a risk of batteries catching fire and exploding.
Please BE SURE to read these INSTRUCTIONS, WARNING and
SAFETY NOTES before you use the charger for the first time.
INTRODUCTION
SPECIAL FEATURES
WARNING AND SAFETY NOTES
LITHIUM
BATTERY
CONNECTION
DIAGRAM
PROGRAM FLOW CHART
LITHIUM BATTERY(LIPO/LIFE/LIION)PROGRAM
NIMH/NICD BATTERY PROGRAM
PB( LEAD-SULPHURIC ACID) BATTERY PROGRAM
BATTERY MEMORY SET
LITHIUM BATTERY METER
SYSTEM SET UP
VARIOUS INFORMATION DURING THE PROCESS
WARNING AND ERROR MESSAGESPECIFICATION
LIABILITY
EXCLUSION
USING THE CHARGE CONTROL SOFTWARE “CHARGE MASTER”
Charging Lithium Battery At Balance Mode
Charging Of Lithium Battery
‘fast' Charging Of Lithium Battery
'storage' Control Of Lithium Battery
Discharging Lithium Battery
Charging Of Nimh/nicd Battery
Charging Nimh/nicd Battery In The Auto Charge Mode
Charging Nimh/nicd Battery In Re-peak Charge Mode
Charge/discharge & Discharge/charge Cycle Of Nimh/nicd Battery
Charging Of Pb Battery
Discharging Of Pb Battery
01
03
06
10
12
14
14
15
16
17
18
19
19
19
20
21
22
22
23
24
26
27
29
30
31
23
