-4-
-6-
-5-
Device Layout CP-36
Pilot / Uni
Technical Parameters
Model name
CP-36
Engine
32 Bit processor
Controls
28 Buttons, 4 Encoders
Connection
USB 2.0 / USB 3.0
Compatibility
Windows 7 or higher
Power
USB 5V / 250mA
Size
180mm x 125mm x 75mm
Weight
500g with holder THA1
Package Contents
1x
CP-36 Control Panel
1x
Table Holder THA1
1x
USB A-B Cable
2x
Hex keys 2.5mm / 3mm
1x
English manual
System Requirements
PC with a free USB port
Windows 7 or higher
R
R
S
Controls Description
1
Rotary encoder "DATA1", value +/-, with push button "PS1"
2
Rotary switch 5 position 1xOFF / 4xON "MODE"
3
Rotary encoder "DATA2", value +/-, with push button "PS2"
4
Momentary toggle switch (ON)-OFF-(ON), "S1,S2"
5
Momentary toggle switch (ON)-OFF-(ON), "S3,S4"
6
Slider switch ON/OFF - ON/OFF, "SLD1/2"
7
Momentary toggle switch (ON)-OFF-(ON), "S5,S6"
8
Self locked toggle switch ON-ON,"GEARS" / S7,S8 (v.Uni)
9
Self locked toggle switch ON-ON,"FLAPS" / S9,S10 (v.Uni)
10 Momentary toggle switch (ON)-OFF-(ON), "S11,S12"
11
Slider switch ON/OFF - ON/OFF, "SLD3/4"
12 Momentary push button (ON)-OFF "PS3"
13 Wheel encoder "DATA3", value +/-
14 Momentary toggle switch (ON)-OFF-(ON), "S13,S14"
15
Momentary toggle switch (ON)-OFF-(ON), "S15,S16"
16
Wheel encoder "DATA4", value +/-
17
Momentary push button (ON)-OFF "PS4"
18
LED Power On
Waranty Information
Enviromental Protection Recommendation
G-FORCE (the manufacturer) offers limited warranties for a period of two (2) years
from the original date of purchase against all manufacturing defects.
Under its warranty, aims to have G-FORCE ship either a complete replacement unit if
necessary, or needed replacement parts for self-installation. Customers replacing
parts themselves will not void their existing warranty. The decision whether a
replacement unit or spare parts are needed is made by G-FORCE on a case-by-case
basis.
The manufacturer’s warranty does not cover accidental damage, or damage caused to
the unit on purpose to require a repair or replacement. This includes, but is not limited
to: excessive filth, excessive force, dropping the unit, submerging the unit in water, or
shorting out the circuits of the unit. G-FORCE reserves the right to make a
determination as to the nature of the defect and whether or not it was caused
intentionally. Intentional damage will void the warranty and no further attempts to repair
or replace will be undertaken by the manufacturer.
Proof of Warranty coverage are the sales receipt or sales record. The G-FORCE
manufacturer warranty is non-transferable.
Contact for technical support and warranty.
G-FORCE, Pluhova 34, 83103 Bratislava, Slovak Republic, EU
Wesite: www.gforcecontrol.com email: [email protected]
At the end of its working life, this product should not be disposed of
with standard household waste, but rather dropped off at a collection
point for the disposal of Waste Electrical and Electronic Equipment
(WEEE) for recycling.This is confirmed by the symbol found on the
product, user manual or packaging.
Depending on their characteristics, the materials may be recycled.
Through recycling and other forms of processing Waste Electrical
and Electronic Equipment, you can make a significant contribution
towards helping to protect the environment. Please contact your ocal
authorities for information on the collection point nearest you.
Programming with software FreeJoyQT
This panel is full programmable with using FreeJoyQT software. This
software you can free download from G-FORCE website, or from
website https://github.com/FreeJoy-Team/FreeJoyConfiguratorQt.
Learn more how to use configuration software with G-FORCE
panel on our website: www.gforcecontrol.com
WARNING:
By changing parameters in configuration software ,you
can cancel the correct functionality of the panel !