FZONE STUDIO FZ-1011, Руководство пользователя

Страница: 4 / 12

USAGE GUIDE
Before usage and installation, thoroughly inspect the unit for any defects, damages or missing parts. If a
part is missing or damaged, contact your Fzone dealer immediately.
• Ensure that all parts of the regulator are secured tightly.
• If dust is visible, remove with a clean cloth.
• Once regulator is attached to CO2 cylinder, keep CO2 system standing upright.
• Double check all power connections to ensure they are connected properly and securely.
• Turn pressure and needle valve knobs down completely before powering on.
APPLICATION GUIDE
The Fzone Mini Regulator can be used on numerous CO2 cylinders depending on user preference.
Applications include standard CGA-320 cylinders, paintball cylinders, and 80-95g 5/8'’ threaded interface
disposable cartridges. The performance of the regulator will not change based on application.
To better understand the different applications of this regulator, refer to the diagrams provided on the
following page.
Note: The operating temperature range shall be no greater than 150° F (70°C) and no less than 0°F
(-18°C). Use 15-20 foot pounds of torque for assembly. Always leak test connections before use. If
temperature is 40°F or below, extra heat may be required to maintain tank pressure. Do not place near
extreme heat sources.
IMPORTANT! USE THIS REGULATOR ONLY FOR CO2!