FKW-248
SETUP
Slide the switch
to OFF (down).
A
Slide the switch
to OFF (down).
B
Insert 1.5V AA battery
into the clock
(+ to the right).
C
Insert 2x 1.5V C batteries
into the battery compart-
ment (+ to the left).
D
DAG
DA
TUM
MAAND
Instellen:
1. zet power schakelaar
op OFF
2. stel tijd in
3. stel dag in
4. stel datum in
5. stel maand in
6. stel jaar in
7. zet power schake-
laar op ON
Bij schrikkeljaar en zomer/
wintertijd de klok handmatig
aanpassen
xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
Hesdo bv., Aziëlaan 12, 5232 BA,
‘s-Hertogenbosch, The Netherlands
FKW-248
Jumbo Analoge Klok
Power:
clock: 1x 1.5V AA
date: 2x 1.5V C
p.d.
MMYY
v1.0
Attention: the day appears 2x consecutively. Stop the first time it appears
when it’s currently before 12 o’ clock noon. If it’s after 12 o’ clock noon,
turn a little further until the day appears for the 2nd time.
Turn anti-clockwise
(e.g. towards your
body) to set the day.
20.
5
5.
3
IN
OUT
°
C
°
C
1. Getting started:
2. batteries in the outdoor sensor:
3. Time setup:
4. Day setup:
Use the small red wheel to set the
actual time, for now it doesn’t matter
whether it’s before or after noon time.
DAG
DA
TUM
MAAND
Instellen:
1. zet power schakelaar
op OFF
2. stel tijd in
3. stel dag in
4. stel datum in
5. stel maand in
6. stel jaar in
7. zet power schake-
laar op ON
Bij schrikkeljaar en zomer/
wintertijd de klok handmatig
aanpassen
xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
Hesdo bv., Aziëlaan 12, 5232 BA,
‘s-Hertogenbosch, The Netherlands
FKW-248
Jumbo Analoge Klok
Power:
clock: 1x 1.5V AA
date: 2x 1.5V C
p.d.
MMYY
v1.0
20.
5
5.
3
IN
OUT
°
C
°
C
Slide the battery cover off
the outdoor sensor
Insert 2x AA 1.5V
batteries
Slide the battery cover
back into the outdoor
sensor
Placing the batteries into the outdoor sensor must be
done
within 1 minute
after inserting the 1.5V C
batteries into the clock. The outdoor sensor will then be
linked directly with the clock.
If it takes longer before you place the batteries into the out-
door sensor, the sensor won’t be linked with the clock and
the ‘OUT’ read-out will remain empty.
In this case, remove both the batteries from the outdoor
sensor and the C batteries from the clock and then re-insert
all of them within one minute.
