Fysic FH-76, Руководство пользователя

Страница: 12 / 16

12
7. BATTERY
7.1 To charge:
• The battery in the headset may be charged by placing the
headset into the base or by connecting the power adapter to
the headset directly.
• While the battery is being charged, the status LED on the
headset will be flashing in a green colour. When the battery
is charged, the trickle charge function is enabled and the
status LED will remain lit in a the green colour.
• It takes 1.5 to 2 hours to fully charge an empty battery.
• You may simply leave the headset in the base. The trickle
charge function maintains the battery charge without any
risk of overcharging.
7.2 Empty battery notification:
5 minutes before the battery in the headset becomes exhaust-
ed, you’ll hear beeps in the headset while the status LED starts
flashing rapidly in the blue colour. Now place the headset onto
the base to recharge the battery.
7.3 Maintenance:
The battery (Lithium Polymer battery) is build into the headset
and requires no maintenance. This battery cannot be replaced
by the user. A Lithium Polymer battery has an average life
span of 2.5 to 3 years. However, before that time a decrease in
capacity will be noticeable which shortens each battery’s use
and demands more frequent charging. This is not covered by
the warranty. Please contact the Fysic Customer Service if the
battery must be replaced.
General safety instructions for batteries or battery packs:
• Never expose batteries to fire or high temperatures.
• Never give batteries to children. Batteries are no toys and
children may put batteries into their mouth.
• Never pierce or cut batteries. Their contents are chemical
and poisonous.
• Never discard of exhausted batteries, but return them to
your local depot for Small Chemical Waste (SCW).