Fyne Audio F700 Series, Информационное руководство, Страница: 6 / 12

6
Your dealer will be able to advise on the most suitable
choice of cables for your budget and system, to obtain the
best performance.
Bare wire connections may be made by unscrewing
the terminal, and making use of the hole in the
threaded post. Alternatively, dedicated 4mm plugs may
be purchased, or are already fitted to terminated
cable sets.
Ensure connections are made positive to positive and
negative to negative between the speaker and the amplifier.
All models are provided with two sets of terminals one for
the HF and one for the LF. When using a single cable wire as
shown, connect the link wires provided (Fig. 3). For bi-wire
operation omit the link wires, and wire with two sets of
cable or a dedicated bi-wire cable (Fig. 4). This option will
ensure the best possible sound quality.
6 CONNECTING SPEAKER CABLES
HF- HF+
LF- LF+
HF- HF+
LF- LF+
SINGLE-WIRED
To Right Speaker
Amplifier / Recevier
Left Right
Left Speaker
3
The loudspeaker is provided with an earth or ground
connection, connected to the drive unit chassis.
The purpose of this is to ground any radio frequency
interference that may get back to the amplifier, reducing fine detail and resolution. A separate earth wire may be
used for this purpose, but best results will be obtained by
using a dedicated screened loudspeaker cable.
7 EARTH CONNECTION
To Ground or ‘Earth’ (Optional)