5
base frame. Unscrew the preset screws & washers at the top of the upright tubes, then lift
the control panel.
3. Use the above preset screws & washers to fix the panel to the upright tubes.
4. Unscrew the preset bolts at the inside of the left tube, and then use these 2 preset bolts
to fix the stretch bolts seat to the inside of left tube.
5.
Put safety key and finish the assembly.
6
. Control Panel
1. Press "START" key
，
the machine will start by 0.5MPH after 3 seconds.
2. Press"+" key for speed up and "-" key for slow down. The fastest speed is 6.5mph and lowest
is 0.5 MPH
3. Press "MODE" key
，
the screen will show Scan, Speed, Time and Calories. And the scan light
will light from speed, time, calorie every 5 seconds.
4. Panel has 12 programs from P1-P12. While on standby, press “PROG” to set the programs
then press “START” key to start the machine.
