10
turnIng the Sound on/off
Long press the SUBTRACTION/
SOUND BUTTON to switch on/off the
beep when the device is not taking
measurements.
dIStance MeaSureMent
SIngle dIStance MeaSureMent
With the unit in measuring mode,
turn on the laser beam by short
pressing the TURN ON/MEASURING
BUTTON.
Aim the laser at the target and press
the TURN ON/MEASURING BUTTON.
The measured value is displayed
immediately on the summary line.
contInuouS MeaSureMent
With the unit in measuring mode,
long press the TURN ON/MEASURING
BUTTON to enter into continuous
measuring mode.
Slowly sweep the laser back and
forth and up and down over the
desired target from a fixed
measuring point. The maximum and
minimum distances are displayed on
the screen as well as the last meas-
ured value marked on the summary
line.
Press the TURN ON/MEASURING
BUTTON or TURN OFF/ REMOVE
BUTTON to exit continuous
measuring mode.
area MeaSureMent
Press the AREA/VOLUME/
PYTHAGOREAN MEASURING BUTTON
to select Area measurement mode
(
).
Press the TURN ON/MEASURING
BUTTON to take the first distance
measurement (length).
Press the TURN ON/MEASURING
BUTTON again to take the second
distance measurement (width).
The results of length, width and area
are displayed on the screen.
Press the TURN OFF/ REMOVE
BUTTON to clear the result.
Press the TURN OFF/ REMOVE
BUTTON again to exit the mode.
1. Length
2. Width
3. Area
1
2
3