FXA FXAJD2835, Инструкция по эксплуатации

Страница: 7 / 56

7
b) Do not use the power tool if the switch does not
turn it on and off. Any power tool that cannot be
controlled with the switch is dangerous and must
be repaired.
c) Disconnect the plug from the power source before
making any adjustments, changing accessories, or
storing power tools. Such preventive safety
measures reduce the risk of starting the power
tool accidentally.
d) Store idle power tools out of the reach of children
and do not allow persons unfamiliar with the
power tool or these instructions to operate the
power tool. Power tools are dangerous in the
hands of untrained users.
e) Maintain power tools. Check for misalignment or
binding of moving parts, breakage of parts and
any other condition that may affect the power
tools operation. If damaged, have the power tool
repaired before use. Many accidents are caused
by poorly maintained power tools.
f) Keep cutting tools sharp and clean. Properly
maintained cutting tools with sharp cutting edges
are less likely to bind and are easier to control.
g) Use the power tool, accessories and tool bits etc.,
in accordance with these instructions and in the
manner intended for the particular type of power
tool, taking into account the working conditions
and the work to be performed. Use of the power
tool for operations different from intended could
result in a hazardous situation.
5) SERVICE
a) Have your power tool serviced by a qualified repair
person using only identical replacement parts. This
will ensure that the safety of the power tool is
maintained.
UNPACKING
Caution! This packaging contains sharp objects. Take
care when unpacking. Remove the machine, together
with the accessories supplied, from the packaging.
Check carefully to ensure that the machine is in good
condition and account for all the accessories listed in
this manual. Also make sure that all the accessories
are complete. If any parts are found to be missing, the
machine and its accessories should be returned
together in their original packaging to the retailer.
Do not throw the packaging away, keep it safe
throughout the guarantee period, then recycle if
possible, otherwise dispose of it by the proper means.
Do not let children play with empty plastic bags due
to the risk of suffocation.
COMPONENTS & CONTROLS (FIG.1)
ASSEMBLY
Note: Before carrying out any assembly or
disassembly of the unit please ensure that the unit is
not connected to the electrical supply.
INSTALLING JIGSAW BLADES
Selecting the correct type of blade is important in
order to obtain the best performance from the saw.
Select the blade based on the application and on the
material you wish to cut. Selecting the right blade will
give you a smoother, faster cut and prolong the life of
the blade.
The toolless blade changing system eliminates the
need for tools when installing or changing a blade.
Note: Before attaching a blade please ensure that the
unit is not connected to the electrical supply.
Lift the quick change blade clamp lever until it stops,
Fig 2.
Holding the blade clamp lever up, insert the saw blade
as far as possible into the slot in the saw bar, Fig 3.
Check to make sure the back of the saw blade is
centered in the groove of the roller guide.
Release the blade clamp lever. Make sure the blade is
securely in place.
Note: During use periodically check the security of the
blade.
1. Variable speed dial
2. Lock-on button
3. Handle
4. Hex key
5. Power cable
6. Dust extraction outlet
7. Angle scale
8. Saw base plate
9. Blade roller support
10. Blade
11. Parallel guide locking knob
12. Blade guard
13. Quick change blade clamp lever
14. Orbital adjustment knob
15. On/Off trigger