FXA 502018667, Инструкция по эксплуатации

Страница: 15 / 32

15
SYMBOLS
The rating plate on your tool may show symbols. These represent important information about the product or
instructions on its use.
Danger! Be aware at all time and
keep clear of moving parts.
Always pay full attention to the
movement of the log splitter. Do
not attempt to load the log on until
the log pusher has stopped.
Keep hands out of the way of all
moving parts.
Protect your hands by keeping
them away from splits and cracks
which open in the log. They may
close suddenly and crush or
amputate your hands. Do not
remove jammed logs with your
hands.
Keep visitors and children away.
The log splitter must be always
operated by one person only.
Other people should keep a safe
distance from the work area,
especially when the log splitter is
under operation. Never use other
people to help you with freeing
jammed log.
Read and understand the owners
manual and labels affixed to the
machine. Learn its application
and limitations as well as the
specific potential hazards peculiar
to it.
Disconnect power. Unplug when
not in use, before making
adjustments, changing parts,
cleaning, or working on the log
splitter. Consult technical manual
before servicing.
Any machine of this type may
throw foreign objects into the
eyes. This can cause permanent
eye damage. Always wear safety
goggles. Everyday eyeglasses
have only impact resistant lenses.
They are not safety glasses.
Do not wear loose clothing,
gloves, neckties or jewellery
(rings, wrist watches). They can
be caught in moving parts.
Protective electronically non
conductive gloves and non-skid
footwear are recommended when
working. Wear protective hair
covering when working. Wear
protective hair covering to contain
long hair, preventing it from
getting it caught in machinery.
Protecting environment: Take used
oil to an authorised collection point
or follow the stipulations in the
country where machine is used.
Do not discharge in to drains, soil
or water.
Inspect the machine before turning
on. Keep guards in place and in
working order. Form a habit of
checking to see that tools are
removed from area before turning
on. Replace damaged, missing or
failed parts.
Before starting the log splitter, the
Bleed Screw should be loosened
by a few turns until air can go in
and out of the oil tank smoothly.
Air flow through the Bleed Screw
hole should be detectable while
the log splitter is under operation.
Before moving the log splitter,
make sure the Bleed Screw is
tightened to avoid leakage from
the hole.