4G LTE FWT ETS-8848 User's Manual Version 1.0
9
set successfully.
Before you start to make setting, Enter
***28167031#
, Then you can do the
following settings according to your needs.
1) Restore to factory default setting
*#99#99# restore to factory default setting.
2) Adjust dial interval
*#01#30# , 01--command
，
30--time
，
Max 9.9 seconds
，
Min 0.5 seconds, default
setting is 3 seconds.
*If you use 4G LTE FWT ETS-8848 for connecting to VoIP gateway, you can set
dial interval as 0.5 second, it can make PDD<5 sec (Method: *#01#05#);
*If you use 4G LTE FWT ETS-8848 for connecting telephone, PBX, billing
device, you can set dial interval as 3 seconds or 5 seconds as you like (Method:
*#01#30#, set the dial interval as 3 seconds).
3) Adjust Earphone Volume
*#02#15# 02--command
，
15--volume
，
Max 16
，
Min 1, default setting is 15.
4) Adjust Mic. Volume (sensitivity)
*#03#10#
03--command
，
10--amount
，
Max 16
，
Min 1, default setting is 10.
5) Setting local area code
*#04#*0755# 10--command
，
*0755—area code
，
Max 5 numbers, use "*"
instead if area code is less than 5 digits.
6) Setting IP numbers
*#05#17911# 05--command
，
17911—IP numbers
，
Max 5 numbers, use "*"
instead if IP number is less than 5 digit.
7
）
Hide Caller ID (been sent out)Setting
*#13#01# 13--command
，
01--value
，
Max-02
，
Min-00
Default setting
is 00
00-- presentation indicator is used according to the subscription of the
CLIR service
01 – CLIR allowed
02 – CLIR prohibited
Notice: This Setting must need carrier’s support.
