FWE RETHERMALIZATION AND HOLDING OVENS
CONGRATULATIONS...
...and thank you for purchasing an FWE Rethermalization Holding
Oven. Your unit has been designed and manufactured under rigid
controls to assure you the most efficient service. It is a full time unit,
and may be used continuously.
Please take a moment to read through this booklet of important
information pertaining to your oven. By following a routine of
proper use and care described on the following pages, your cabinet
will last for many years.
IMPORTANT:
Your
Manufacturer Registration Card
must be
returned within 30 days after initial delivery to activate the warranty.
SERIAL AND MODEL NUMBER
UNPACKING
These numbers are found on the nameplate (serial tag) affixed
near the electrical cord portal. Please record them in this
booklet, in the space provided on page 14. When ordering
parts and/or service, you will need to provide this information.
The voltage and amperage of the unit are also stamped
on the serial tag.
After uncrating your oven, remove all tape and padding which
held all doors, shelves, racks, cord, etc., in place
during shipment.
6
FWE RETHERM OVENS
