FVC Sprinter Side Ladder Скачать руководство пользователя страница 7

Страница: 7 / 8

FLATLINE VAN CO • [email protected] • 888-667-5576

TAKE THE MOUNT PLATE (SEE RIGHT) AND LOOSELY ATTACH IT TO THE

BOTTOM OF THE LADDER USING THE 3/8-16 X 1” SCREWS, 3/8 FLAT WASHERS,

AND 3/8-16 NYLOCK NUTS. YOU’LL WANT TO SLIDE THE BRACKET UP AS

TIGHT TO THE PINCH SEAM ON THE BOTTOM OF THE VAN AS YOU CAN, AND

THEN TIGHTEN THE BOLTS.

NOTE-

MAKE SURE THAT THE LADDER IS STRAIGHT UP AND DOWN.

USING THE MOUNT PLATE AS A GUIDE, DRILL THE THREE CENTER HOLES

THROUGH THE PINCH SEAM, THEN SCREW THE 1/4 SELF DRILLING SCREWS

THROUGH THEM. YOU’LL HAVE TO REMOVE THE LADDER TO GET TO THE

REMAINING TWO (2) AS THEY SIT BEHIND THE LADDER UPRIGHTS AND ARE

NOT ACCESSABLE. (SEE

FIGURE 4

)

NOTE-

IF DESIRED, YOU CAN REPLACE THE SELF DRILLING SCREWS

WITH 1/4-20 BOLTS & NUTS.

AFTER INSTALLING THE REMAINING TWO (2) 1/4 SELF DRILLING SCREWS,

TIGHTEN DOWN ALL BOLTS FOR THE LADDER. YOU’RE READY TO HIT THE

ROAD!

MOUNT PLATE

FIGURE 4

Содержание Sprinter Side Ladder

Страница 1: ...PRODUCT IMAGE SP0201B Sprinter Side Ladder Installation Guide FLATLINE VAN CO SUPPORT FLATLINEVANCO COM 888 667 5576 ...

Страница 4: ... TOP QTY MOUNT PLATE QTY 1 RAIL NUT QTY 2 1 4 20 FLANGE HEAD SCREW QTY 8 3 8 16 X 1 BUTTON HEAD SCREW QTY 2 3 8 SPLIT LOCK WASHER QTY 2 STICKER PACK QTY 1 INSTALLATION GUIDE QTY 1 3 8 16 X 75 BUTTON HEAD SCREW QTY 2 COUPLER QTY 2 3 8 FLAT WASHER QTY 2 1 4 SELF DRILLING SCREW QTY 5 3 8 16 NYLOCK QTY 2 ...

Страница 5: ...ED 1 PLACE THE LADDER HALVES FRONT SIDE DOWN INSERT THE COUPLERS INTO ONE HALF SEE FIGURE 1 AND TIGHTEN DOWN USING THE 1 4 20 SCREWS 2 SLIDE THE OTHER LADDER HALF ONTO THE COUPLERS AND TIGHTEN DOWN NOTE IF DESIRED YOU CAN USE BLUE LOCTITE ON THE SCREWS 4 FIGURE 1 FIGURE 2 ...

Страница 6: ...ACK THIS MAY BE TIME CONSUMING 4 NOW POSITION THE LADDER ON THE VAN HANGING IT ON THE ROOF RAIL LOOSELY SCREW THE TOP OF THE LADDER DOWN TO THE ROOF RAIL USING THE 3 8 16 X 75 SCREWS AND THE 3 8 SPLIT LOCK WASHERS JUST ENOUGH THAT IT IS SNUG SEE FIGURE 3 NOTE WE LIKE TO PLACE THE LADDER AS CLOSE TO THE REAR WHEEL WELL AS WE CAN SEE IMAGE BELOW 5 RAIL NUT FIGURE 3 ...