FLATLINE VAN CO • [email protected] • 888-667-5576
6.
ONCE YOU’VE GOT BOTH ENDS TIGHTENED; IT’S TIME TO START LAYING
DOWN YOUR CROSSBARS. WE’VE PROVIDED DIMENSIONS BELOW IN
FIGURE 4
TO MAKE IT EASY. MAKE SURE YOU VERIFY THE DIMENSION ON
BOTH ENDS OF THE CROSSBAR RELATIVE TO THE
REFERENCE POINT
TO
ENSURE THEY ARE SQUARE. THIS WILL MAKE IT MUCH EASIER WHEN
MOUNTING YOUR DECKING PANELS LATER. THE DIMENSIONS ARE PULLED
FROM THE FLANGE ON THE TRAY OF THE REAR BASKET TO THE FRONT FACE
OF THE CROSSBAR (FURTHEST SIDE)
WAIT TO TIGHTEN THE CROSSBARS
UNTIL YOU HAVE PUT ALL OF THEM IN.
NOTE-
REMEMBER TO LEAVE THE RAIL MOUNT FEET LOOSENED.
WE’LL TIGHTEN THOSE DOWN IN A LATER STEP.
9
FRONT
BACK
REFERENCE POINT
FIGURE 4
0"
5
1 16
"
34
1 16
"
49
9 16
"
78
9 16
"
112
9 16
"
141
9 16
"
157
1 16
"
DETAIL E
1/4-20 X 0.75 FLANGED HEX
HEAD SCREW
