Schematic
If you think it’ll help...
The tags of your footswitch
or toggle switch should be
oriented horizontally as
shown in red >>>>
If you want to wire up an off-
board DC socket, the V and
GND pads are marked >>>>
Страница 1: ...Rig Make sure your builds are sweet before you box em up Contents of this document are 2016 Pedal Parts Ltd No reproduction permitted without the express written permission of Pedal Parts Ltd All rights reserved ...
Страница 2: ...G GND CIRCUITS The circuit is designed for use with standard negative ground builds To test positive ground circuits you ll have to either use a tip positive supply or connect your battery up in reverse The LED won t function when doing this That s about it Carry on ...
Страница 3: ...Schematic If you think it ll help The tags of your footswitch or toggle switch should be oriented horizontally as shown in red If you want to wire up an off board DC socket the V and GND pads are marked ...
Страница 4: ...eo output jack can be mono 2 1mm DC socket PCB mount 3PDT Footswitch or 3PDT Toggle Switch SIL sockets 4 or 6 way TESTING YOUR CIRCUIT Direct Connect Simply insert your 4 or 6 way ribbon connector into the sockets More often than not it ll be 4 way this should be inserted into the middle four sockets ignoring the outer two Ensure you have the connections the right way around i e IN to IN V to V et...
