This template is a rough guide only. You should ensure correct marking of your
enclosure before drilling. You use this template at your own risk.
Pedal Parts Ltd can accept no responsibility for incorrect drilling of enclosures.
FuzzDog.co.uk
Drilling template
Hammond 1590A
31 x 90 x 27 mm
Recommended drill sizes:
Jacks 12mm
DC Socket 8-10mm
48mm
2mm
48mm
2mm
23mm
The wired mini DC sockets require an 8mm hole.
If you’re using a board-mounted DC socket you need to have a hole big enough so
that the sleeve of the plug doesn’t touch the enclosure. 10mm should suffice.
Top
Side
Board-mounted DC
Side
Wired DC