WIRING FOR TESTING
Connect everything up but the LEDs. That includes the footswitches.
Ensure your power supply is 9V Tip Negative, or connect up a battery for
now. If connecting a battery, solder long lengths of wire to the +V and GND
pads on the PCB, then attach the battery to the other end of these. This
saves desolding stuff from the board, which is a pain.
JACK SOCKETS
DC SOCKET
GND
+V
GND
SIGNAL
Ignore the third tag
- you only need that
if wiring up for
battery.
SIGNAL is JACK IN and
JACK OUT on the PCB.
Each socket has its own
GND connection
conveniently placed.
Plug in. Go!
If it works, crack on and get it in the box. If not, troubleshoot. Check you
have everything in the right place and reflow any poor joints.
