FuzzDog DeathDrive, Руководство пользователя

Страница: 13 / 16

FuzzDog.co.uk
Drilling templates
The templates on the following pages are a guideline only. Ensure correct
marking of your enclosure, and compare component positions on your built
circuit to your markings before drilling.
The only critical positions in relation to the main PCB are any board mounted components.
We’ve only provided one template for the 1590DD size enclosure, as there are no rules for
that one. Position your controls however you see fit, as long as you have one or two board
mounted components to hold your PCB securely.
Our templates are based on using Lumberg KLBM-3 jacks which fit nicely above the pots in
these cases. If you’re using a different type you’ll have to work out for yourself how far down
the pots need to be to allow clearance for any lugs.
On the 1590DD enclosures there’s an extra rib in the centre, so take that into consideration
when drilling your middle footswitch and your DC socket hole.